- Good value for money
- Easy start-up and commissioning
- Rugged design for harsh industrial conditions
- Proven technology
- Accurate dust measurement
- Extremely wide measurement range
- Detection limit of 0,01 mg/m3
- Normalized (instruments are all identical
Sintrol S203 Dust Monitor
Trend monitor with 4-20mA output for continuous dust measurement
Continuous trend monitor that gives plant operators to see the performance of the filtration systems and ducts over a period of time. Perfect for installation after any filtration system or in common line channels leading into the emissions points of a plant.
State of the art Inductive Electrification principle minimizes the need for maintenance on the dust monitor and provides an accurate trend for end users. 4-20mA output combined with an easy to use auto-setup feature that takes less than 30 minutes from installation makes the device both convenient and reliable.
Specifications
| Measurement Objects | Total Suspended Particles (TSP) |
| Measurement Range | Detection Limit 0,01 mg/m³ Maximum Range up to several g/m³, depending on conditions |
| Measurement Principle | Inductive Electrification |
| Protection Code | IP65 |
| Power supply | 24 VDC and 80-240 VAC |
| Power consumption | Up to 10 W |
| Output signals | • Two dry contact Relays, max 5A@30VDC / 5A@240VAC • Isolated 4-20 mA output loop |
| Communication interface | • Serial communication RS-485 • USB |
| Communication protocol | • Modbus RTU (RS-485) • Sintrol network (USB, RF and RS-485) |
| Ambient Conditions | |
| Temperature | -40°C to +60 °C (-40 °F to 140 °F) |
| Humidity | Max 95% RH (non-condensing) |
| Materials and Weight | |
| Enclosure / casing | Aluminum |
| Weight | 1,5 kg (3,3 lbs) |
| Process conditions | |
| Temperature | Max 200 °C (392 °F) default, optionally up to 700 °C (1292 °F) |
| Pressure | Max 300 kPa default, optionally up to 6000 kPa |
| Humidity | Max 95% RH (non-condensing) |
