Environmental Monitoring Solutions
AQ Guard Smart 1000 is suitable for outdoor use under extreme conditions. It has proven its performance under a wide range of meteorological conditions.
For better utilization of its heat, the heated inlet is located inside the housing and is dynamically switched on depending on the humidity and temperature. The AQ Guard Smart System has Ethernet, WLAN, and cellular connectivity and supports ASCII and MODBUS protocols for communication. All data is continuously recorded and can be retrieved retrospectively and in real-time.
The AQ Guard Smart 1000 supports model calculations of the current fine dust pollution and forecasts. These will be based on stricter limit values in the future, requiring lower uncertainties for local measurements.
The device offers manufacturers and users of low-resolution sensors a comparison option and, thus, a plausibility check before the measured values are made available for further processing in formation and dispersion studies.
Sensors that measure temperature, humidity, and pressure are integrated as standard.
AQ Guard Smart System has a pole or tripod mount and can be extended with a sunshade and LoRa modem if required.
Categories:
Have questions? Call +61 2 9622 6327
| Measuring principle | Optical light scattering at single particles |
| Reported data | PM1, PM2.5, PM4, PM10, TSP, CN, CO2; particle size distribution, ambient pressure, ambient temperature, rel. ambient humidity |
| Measurement range (number CN) | 0 – 20,000 particles/cm³ |
| Measurement range (size) | 0.175 – 20 µm |
| Measurement range (mass) | 0 – 100 mg/m³ (depending on the composition of the aerosol) |
| Size channels | 64 (32/decade) |
| Time resolution | 1 min, moving average 1 min (MyAtmosphere), every second via internal protocols |
| Interfaces | USB, Ethernet (LAN), Wi-Fi, 3G/4G via Modem, optional: LoRaWAN |
| Protocols | ASCII, MODBUS, UDP |
| Light source | Long term stable LED |
| Power supply | Supplied power supply: 12 V |
| Power consumption | Standard operation: 1.2 A (1.7 A with additional heating) |
| Installation conditions | -20 – +50 °C |
| Dimensions | 530 × 270 × 208 mm (H × W × D) |
| Weight | Approx. 6 kg |
| Special features | Heated inlet, mast / tripod mount |
| Data management | Prepared for connection to the Palas Cloud MyAtmosphere (“MyAtmosphere-ready”); Internet access and separate registration required. The MyAtmosphere terms of use apply. |
Talk to our sales team. Call +61 2 9622 6327
Indicative measuring device for monitoring ambient air quality parameters PM1, PM2.5, PM10, CO, NO2, O3, SO2
The device measures wind speed and direction and is powered by its integrated solar panel. It also has a rechargeable lithium battery (located under the ultrasonic plate).
The Cloud Droplet Analyser is an optical aerosol spectrometer for high-resolution measurement of the size distribution and number concentration of cloud aerosols.
AQ Guard Smart 2000 for ultrafine particles closes the gap between classical condensation particle counters and optical systems.
Ambient
