Environmental Monitoring Solutions
The mercury analyzer PA-2 is used for continuous monitoring of mercury concentrations in industrial processes.
Categories:
Have questions? Call +61 2 9622 6327
| Technical Specifications | |
| Measuring principle | Amalgamation on MI GoldTrap (PA-2 Gold only), cold vapor atomic absorption (CVAAS) at 253.7 nm |
| UV-Source | Electrodeless low pressure mercury lamp (EDL) |
| Stabilization method | Reference beam method |
| Optical cell | Fused silica (Suprasil), lapprox. 230mm, heated approx. 55° |
| Measuring ranges PA-2 | 0.1 … 1 µg/l to 0…10 mg/l |
| Measuring ranges PA-2 Gold | 0.01 … 1 μg/l to 0.1 … 10 μg/l |
| Sensitivity | > 0.01 µg/l |
| Response time | approx. 1 minute |
| Sample flow | approx. 20 l/h |
| Carrier gas | compressed air, filtered, approx. 30l/h, 1bar |
| Reduction reagent | Tin-II-chloride or Sodiumhydroborate |
| Reagent consumption | approx. 3l/week for each reagent |
| Sample digestion | HCl or H2SO4, KMnO4 or H2O2 or Fenton’s Reagent or NaClO3; depending on sample composition |
| Technical Data | |
| Signal outputs | analogue: 4 – 20 mA (500 Ω max.); serial: RS232 / USB/td> |
| Status output | Calibration; Autozero; Service; Malfunction; according to NAMUR 64 recommendations |
| Housing | Fibreglass-reinforced polyester, for use in highly corrosive environment – Reagent storage cabinet made of chemically resistent plastic material/td> |
| Protection class | IP 66 (EN 60529/ NEMA 3; 3R; 4; 4X; 12; 13) |
| Operating temperature | 0 to 40°C |
| Sample temperature | 65°C |
| Power supply | 230 VAC / 50 Hz (110 VAC / 60 Hz option) |
| El. Power consumption | 750 VA max. (PA-2 Gold, heating peak) |
| Dimensions (W x H x D) | 62 x 78 x 33 cm |
| Weight | approx. 50 kg |
Talk to our sales team. Call +61 2 9622 6327
Comprises a multiplexer-valve unit and a highly accurate...
QAL 1 certified for continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.) With over 20 years experience, Mercury Instruments (part of ENVEA Group) were the first to develop mercury monitors and mercury analyzers using a dry thermocatalytic method instead of wet chemistry. The SM-4 Mercury Monitor is QAL1 certified and is ready to meet future regulatory requirements (Minamata convention & European directives for thermal power plants and incinerators).
Automatic systemdesigned for continuous mercury monitoring in natural gas even in hazardous zones (ATEX, IEC-Ex) Each mercury on-line system will differ in sample characteristics as well as installation conditions and operating environment. We have the experience to design systems that fully meet the requirements of your particular mercury monitoring task.
The AULA-254 Gold is a fully automated system for analyzing traces of mercury in aqueous and digested samples In contrast to a typical multi-element AAS the AULA is specially designed for mercury determination. The use of a highly stable low-pressure electrodeless mercury discharge lamp (EDL) in connection with the latest UV detector techniques result in excellent baseline stability and low detection limits. The AULA-254 Gold system meets current regulations, with capacity in reserve to meet more stringent standards.
The LabAnalyzer is the perfect solution for quantitative determination of mercury in aqueous samples and sample digests in the laboratory. In contrast to a typical multi-element AAS the LabAnalyzer 254 is specially designed for elemental mercury. This allows top performance in analytical applications. The use of a specially developed highly stable mercury lamp in connection with thermostat-controlled UV sensors results in a detection limit of a few ppt of mercury.
Measuring of Total Gaseous Mercury (TGM) in air and other gases. Reliable for measurements at ultra-trace levels (sub-ng/m³) according to EN 15852 . The UT-3000 operates automatically. All functions are controlled by an embedded microprocessor. When measurements are carried out, all parameters and results are stored in the integrated data logger. With standard settings the data logger has a recording capacity of 5000 measurements (approx. 2 months).
Mercury