Smart environmental monitoring solutions
The AirGen series RACK ZA FID is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. Very compact, the RACK ZA FID Air can purify up to 50 L/min of compressed Air and can bear a pressure up to 7 bar (101 PSI).
The filtration of the hydrocarbons is performed by using a catalytic oven filled with palladium. The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, considerably increasing detector sensitivity and ensuring precise analytical results. High efficiency coalescing pre-filtration and post filtration of particulate size greater than 0.01 microns are used to prevent any kind of particles from entering the analytical device.
The RACK ZA FID has a very simple and efficient interface. It can also be managed by the HydroGen series and is ideal to supply Hydrocarbon free Air to FID detectors.
Categories:
Have questions? Call +61 2 9622 6327
| Models: ZA RACK FID | 1.5 | 3 | 6 | 15 | 30.0 | 50.0 |
| Zero air outlet | ||||||
| Flow rate (Max) | 1.5 l/min | 3.0 l/min | 6.0 l/m | 15.0 l/min | 30.0 l/min | 50.0 l/min |
| Outlet pressure (min) | Inlet pressure – 0.5 bars (8 psi) @ maximum flow | |||||
| Outlet pressure (Max) | 6.5 bars (94 psi) | |||||
| Total hydrocarbon content | <0.05ppm | |||||
| Air inlet | ||||||
| Max inlet hydrocarbon content | 100ppm | |||||
| Minimum supply pressure | 3 bars (43psi) | |||||
| Max supply pressure | 10 bars (145 psi) | |||||
| Dew point | < -20°C | |||||
| Temperature (min; max) | 1°C (34°F); 35°C (95°F) | |||||
| Communication | ||||||
| RS485 | default | |||||
| General data | ||||||
| Supply voltage | 100-240Vac 50/60Hz | |||||
| Connection type | IEC320-C13 | |||||
| Installation power (Max) | 240W (280VA) | |||||
| Fuse rating (5x20mm) | 4A | |||||
| Dimensions | Standard 2U rack (48 cm deep) | Standard 4U rack (40cm deep / 65cm deep for 50.0) | ||||
| Net weight | 13kg | 18kg | 20kg | |||
| Connections | ||||||
| Outlet port | 1/8″ female BSPP | |||||
| Inlet port | 1/8″ female BSPP | |||||
| Water purge | Threaded ISO M5 female | |||||
| Operating conditions | ||||||
| Temperature | 5-35°C (41-95°F) | |||||
| Humidity (max, non-condensing) | 80% at 25°C (77°F) | |||||
| Noise | <25dB(A) | |||||
| IP rating | IP20 | |||||
Talk to our sales team. Call +61 2 9622 6327
The NitroGen series NG CASTORE XL iQ use Membrane technology. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen up to 70 L/min with a purity up to 99.9%. This NG series is equipped with a scroll built-in oil less compressor with inverter technology. The new iQ series is equipped with the innovative direct drive motor-compressor system that result in lower noise than the previous version. The exclusive electronic flow control combined with the compressor control by the inverter allows to generate Nitrogen with a higher purity using a smaller volume at less pressure of air which results in reduced energy costs and increase the life time of the compressor. Continuous control of the operating parameters of Nitrogen allows to maintain the system at its maximum efficiency. The CASTORE XL iQ has been developed to meet specific requirements in term of gas, flow, purity and pressure in LC-MS applications. It can be used for the evaporation of solvents in samples being analysed.
The HydroGen series HG PRO is able to generate up to 1500 cc/min of Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 psi). The HG PRO includes a new long life multilayer electrolytic cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are used. The innovative gas drying system (two-column drying PSA system with automatic regeneration) ensures the maximum grade of hydrogen purity, it is completely maintenance-free and allows continuous operation, 24 hours a day. The on-board CPU automatically check for internal leaks and constantly control the operating parameters to guarantee full safety. Up to 20 units can be connected in parallel using an external control box. The touch-screen LCD interface provides simple and user-friendly management of all functions on the unit. Stackable with various other models: AG-OFCAS35; NG-EOLO; AG-ZA-Fid
The NitroGen series NG CASTORE XS iQ are Membrane Nitrogen Generators. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen up to 36l/min with a purity up to 99.9%. This NG series is equipped with a scroll built-in oil less compressor with inverter technology. The exclusive electronic flow control combined with the compressor control by the inverter allows to generate Nitrogen with a higher purity using a smaller volume at less pressure of air which results in reduced energy costs and increase the life time of the compressor. Continuous control of the operating parameters of Nitrogen allows to maintain the system at its maximum efficiency. The CASTORE iQ has been developed to meet specific requirements in term of gas, flow, purity and pressure in LC-MS applications. It can be used for the evaporation of solvents in samples being analysed.
Gas Generators
