Environmental Monitoring Solutions

Talk to our sales team. Call +61 2 9622 6327

Request a quote
Back to products

JCT JH3BE

Heated Sample Line – self-regulating cut to length

  • Extractive gas analysis
  • Emission and process monitoring
  • Transport of sample gas from the sample point to the analysis system
  • To stay safely above the acid dew point
  • Protection against freezing
  • To prevent measurement faults
  • Indoor and outdoor use

Have questions? Call +61 2 9622 6327

Benefits

  • No condensate formation, no freezing
  • Robust external protection
  • Excellent insulation
  • Optimal heat deployment
  • Easy to cut to length and assemble at site
  • Available per meter (max. 130  m per roll)

Features

  • Maintain temperature up to 120 °C
  • External jacket of corrugated polyamide PA12
  • Heat insulation with thermo fleece
  • Maximum length of heated line: 65 m
  • Inner core: PTFE, PFA or SS316, DN 4 to DN 8
  • Complete assembling sets with connection cable and silicone end caps or ready for use ex works
  • Second core for e.g. calibration gas as option
  • Extractive gas analysis
  • Emission and process monitoring
  • Transport of sample gas from sample point to analysis system
  • To stay safely above the acid dew point
  • Protection against freezing
  • To prevent measurement faults
  • Indoor and outdoor use
Model JH3BE
Description self-regulated heated sample line “cut-to-length on-site” or “pre-assembled” from factory
External jacket corrugated polyamide 12 jacket, black
option: with silicone layer
Sample gas core fixed; interchangeable on request
Area of application fixed installation indoor and outdoor
Operation data
Operating temperature self-regulating 30 °C / 100 °C / 120 °C (optional 5 °C / 50 °C / 80 °C)
at –20 °C ambient temperature
Operating pressure at 150°C atmospheric
option pressure hose:
– PFTE / PFA core: DN 4/6 mm 6 bara; DN 6/8 mm 4 bara; DN 8/10 mm 3 bara,
1/4″ OD 7 bara, 3/8″ OD 5 bara
– SS316 core, all diameters: 10 bara
Ambient temperature –20°C to +60°C
Construction
Material sample gas core PTFE, PFA, SS316
Heating element heating cable
Thermal insulation multi-layered thermal fleece
End configuration silicone caps (mounted ex-works or on-site termination kit)
Maximum length of finished sample line see table “rated output” / column “maximum length of heating circuit” on page 4
Outer diameter heated sample line (without end caps) for operating temperatures up to 100 °C: 43 mm
for operating temperatures 120°C: 55 mm
Dimension silicone end caps heated sample line diameter plus 6 mm
Minimum bending radius DN 4/6 and DN 6/8 mm: 230 mm
DN 8/10 and DN 10/12mm: 280 mm
with interchangeable inner core: DN 4/6 and DN 6/8 mm: 280 mm
Weight 1000 g/m
Maximum production lenght max. 150 m
Protection class IP54 (EN60529)
Approvals / Sign CE
Electrics
Power supply 115 VAC 50/60 Hz or 230 VAC 50/60 Hz
Power consumption at +10°C ambient temperature see table “power consumption” on page 4
Temperature sensor without; optional 2-wire PT100; others on request
Connection cable 1.5 m cable with open leads, depending on power consumption:
up to 16 A = 3 x 1.5 mm² cables
up to 25 A = 3 x 2.5 mm² cables
up to 32 A = 3 x 6 mm² cables with modified end cap

* At voltages below 230 VAC the power density is reduced and at ambient temperatures below 0 °C the max. temperature is reduced. For further information please contact our Norditech sales team.

DOWNLOADS

You have successfully subscribed to our newsletter!