Environmental Monitoring Solutions
The AirGen series ZA FID Air is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. Very compact, the ZA FID Air can purify up to 30 L/min of compressed Air and can bear a pressure up to 7 bar (101 PSI).
The filtration of the hydrocarbons is performed by using a catalytic oven filled with palladium. The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, considerably increasing detector sensitivity and ensuring precise analytical results.
High efficiency coalescing pre-filtration and post filtration of particulate size greater than 0.01 microns are used to prevent any kind of particles from entering the analytical device. The ZA FID Air has a very simple and efficient interface. It can also can be managed by the HydroGen series HG PRO and HG BASIC and is ideal to supply Hydrocarbon free Air to FID detectors.
Categories:
Have questions? Call +61 2 9622 6327
| Models: ZA FID Air | 1.5 | 3.0 | 6.0 | 15,0 | 30,0 |
| Zero Air outlet | |||||
| Flow rate (Max) | 1.5 l/min | 3.0 l/min | 6.0 l/m | 15.0 l/min | 30.0 l/min |
| Outlet pressure (Max) | 7 bar (101.5 psi) | ||||
| Total hydrocarbon content | < 0.05ppm | ||||
| Air inlet | |||||
| Air Inlet requirement | ISO 8573-1:2010 Class [2:4:1] | ||||
| Max inlet hydrocarbon content | 100ppm | ||||
| Min supply pressure | 3 bar (43psi) | ||||
| Max supply pressure | 10 bar (145 psi) | ||||
| Temperature (min; Max) | 1°C (34°F); 35°C (95°F) | ||||
| Communication | |||||
| RS485 | Standard | ||||
| General data | |||||
| Supply voltage | 100-240Vac (±10%) 50/60Hz | ||||
| Connection type | IEC320-C14 | ||||
| Nominal power (Max) | 70 W (200 W) | 140 W (240 W) | |||
| Fuse rating (5x20mm) | 4A (250VAC – T) | ||||
| Dimensions (W x D x H) | 27 x 47 x 14 cm | ||||
| Net weight | < 8 kg | < 10 kg | < 12 kg | ||
| Connections | |||||
| Outlet port | 1/8″ female BSPP | ||||
| Inlet port | 1/8″ female BSPP | ||||
| Water purge | Threaded ISO M5 female | ||||
| Operating conditions | |||||
| Temperature | 5-35°C (41-95°F) | ||||
| Humidity (max, non condensing) | 80.00% [5-35°C (41-95°F)] | ||||
| Noise | < 35dB(A) | ||||
| IP rating | IP20 | ||||
Talk to our sales team. Call +61 2 9622 6327
The HydroGen series HG PRO 4000 is able to generate up to 4000 cc/min of Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 psi). The HG PRO includes a new long life multilayer electrolytic cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are used. The two-column PSA drying system with automatic regeneration ensures the maximum grade of hydrogen purity, and is completely maintenance-free. The HG PRO 4000 is the ideal Hydrogen for all GC-FID detectors. The on-board CPU constantly controls the operating parameters to guarantee full safety. The touch-screen LCD interface provides simple and user-friendly management of all functions on the unit.
The HydroGen series HG PRO is able to generate up to 1500 cc/min of Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 psi). The HG PRO includes a new long life multilayer electrolytic cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are used. The innovative gas drying system (two-column drying PSA system with automatic regeneration) ensures the maximum grade of hydrogen purity, it is completely maintenance-free and allows continuous operation, 24 hours a day. The on-board CPU automatically check for internal leaks and constantly control the operating parameters to guarantee full safety. Up to 20 units can be connected in parallel using an external control box. The touch-screen LCD interface provides simple and user-friendly management of all functions on the unit. Stackable with various other models: AG-OFCAS35; NG-EOLO; AG-ZA-Fid
The NitroGen series NG CASTORE XL iQ use Membrane technology. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen up to 70 L/min with a purity up to 99.9%. This NG series is equipped with a scroll built-in oil less compressor with inverter technology. The new iQ series is equipped with the innovative direct drive motor-compressor system that result in lower noise than the previous version. The exclusive electronic flow control combined with the compressor control by the inverter allows to generate Nitrogen with a higher purity using a smaller volume at less pressure of air which results in reduced energy costs and increase the life time of the compressor. Continuous control of the operating parameters of Nitrogen allows to maintain the system at its maximum efficiency. The CASTORE XL iQ has been developed to meet specific requirements in term of gas, flow, purity and pressure in LC-MS applications. It can be used for the evaporation of solvents in samples being analysed.
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic level control and an automatic fill function “Autorefill” from an external source. Its innovative gas drying system is completely maintenance-free and allows continuous operation, 24 hours a day. The exclusive, electronically-controlled, gas/liquid separator automatic checks for internal leaks whenever starting the unit, and a constant control of operating parameters guarantees maximum safety. The touch-screen LCD interface provides a direct simple control and management of all functions on the unit. The RS232 and LAN ports allow a remote control of the system from anywhere in the world.
Gas Generators
