Smart environmental monitoring solutions
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic level control and an automatic fill function “Autorefill” from an external source.
Its innovative gas drying system is completely maintenance-free and allows continuous operation, 24 hours a day. The exclusive, electronically-controlled, gas/liquid separator automatic checks for internal leaks whenever starting the unit, and a constant control of operating parameters guarantees maximum safety. The touch-screen LCD interface provides a direct simple control and management of all functions on the unit. The RS232 and LAN ports allow a remote control of the system from anywhere in the world.
Categories:
Have questions? Call +61 2 9622 6327
| H2 Power 10L | |
| Hydrogen principal data | |
| Electrolytic cell | PEM technology (No acid or alkaline solutions are used) |
| H2 purity | >99.99999%. Referred to O2, DewPoint < -75°C |
| Outlet pressure (max) | 12Bar (optional 16 Bar) |
| H2 flow rate (max) | 1 Nm3/h (3 x 3300cc/min) |
| Drying system | Maintenance-free |
| I/O communication | |
| Touch-screen LCD 128×64 pixel | Standard |
| Output pressure gauge | |
| RS232 | |
| LAN | |
| Software/safety functions | |
| Internal H2 sensor | Optional |
| Cell voltage control | Standard |
| Automatic fault detection | |
| Power supply temperature detection | |
| Automatic safety de-pressurization | |
| Water level control | |
| Automatic tank refill | |
| Fill canister function | |
| Connections | |
| H2 outlet port | 1/8” compression tube fitting |
| Water inlet port | 1/4” tube, quick release push to lock fitting |
| Water | |
| Quality | Deionized, ASTM II, <0.1uS |
| Generator internal tank capacity | 3.3 l (3 x 1.1 l) |
| External tank capacity (for refilling) | 10 l |
| Consumption rate | 1l/hour |
| Electrical data | |
| Power supply connection type | 3 x wires 4mm3 (2 wire+ground) |
| Power supply voltage | Single phase 230VAC, 50/60 Hz |
| Power supply current (max) | 30A |
| Energy required | 5.8kWh/Nm3 (end life 6.7kWh/Nm3) |
| General data | |
| Operating temperature | 5-35°C (41-95°F) |
| Storage temperature | 1-40°C (33.8-104°F) |
| Operating humidity (non-condensing) | 80% at 25°C (77°F) |
| Ingress protection rating | IP20 |
| Pollution degree rating | 2 (with no aromatic compounds) |
| Cabinet ventilation | 2 x 135 Nm3/h controlled with thermostat |
| Dimensions (w * h * d) | 59 * 164 * 81 cm |
| Net weight (water tanks empty) | <180kg |
| Altitude | <2000m |
| Certifications | CE, ISO9001 |
*1 Referred to O2 – DewPoint < -25°C (<-13°F), Atmospheric Dew Point (ADP)
| N. | Qty. | Description |
| 1 | 1 | Closet Rack 28 unit |
| 2 | 1 | Power supply 3 units, 6920.30.002 |
| 3 | 3 | Hydrogen Generator 5 units, 6920.16.330 |
| 4 | 1 | Rack tank 24L 3 units (for Generators refilling) 6920.11.002 |
| 5 | 1 | Pipeline kit for cascading, 6930.00.030 |
| 6 | 1 | Master Box controller with LAN, 6930.00.025 |
| 7 | 2 | Cooling fans |
Talk to our sales team. Call +61 2 9622 6327
The HydroGen series HG ST BASIC is able to generate up to 600 cc/min of Hydrogen with purity better than 99.9999% and pressure up to 10 bar (145 psi). The HG ST BASIC includes a new long life multilayer electrolytic cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are used. The innovative drying system ensures the maximum grade of hydrogen purity, protects the GC thanks to its innovative humidity safe guard, HG ST BASIC is completely maintenance-free and allows continuous operation, 24 hours a day. The on-board CPU automatically check for internal leaks and constantly control the operating parameters to guarantee full safety. Up to 20 units can be connected in parallel mode using an external control box.The touch-screen LCD interface provides simple and user-friendly management of all functions on the unit.
The HydroGen series HG PRO 4000 is able to generate up to 4000 cc/min of Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 psi). The HG PRO includes a new long life multilayer electrolytic cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are used. The two-column PSA drying system with automatic regeneration ensures the maximum grade of hydrogen purity, and is completely maintenance-free. The HG PRO 4000 is the ideal Hydrogen for all GC-FID detectors. The on-board CPU constantly controls the operating parameters to guarantee full safety. The touch-screen LCD interface provides simple and user-friendly management of all functions on the unit.
The HydroGen series HG PRO is able to generate up to 1500 cc/min of Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 psi). The HG PRO includes a new long life multilayer electrolytic cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are used. The innovative gas drying system (two-column drying PSA system with automatic regeneration) ensures the maximum grade of hydrogen purity, it is completely maintenance-free and allows continuous operation, 24 hours a day. The on-board CPU automatically check for internal leaks and constantly control the operating parameters to guarantee full safety. Up to 20 units can be connected in parallel using an external control box. The touch-screen LCD interface provides simple and user-friendly management of all functions on the unit. Stackable with various other models: AG-OFCAS35; NG-EOLO; AG-ZA-Fid
Gas Generators
