The Model 1000M methane catalytic oxidizer is an easy to use, reliable method for the removal of methane or carbon monoxide. Ideal for use with any of Sabio’s air sources, this oxidizer is extremely effective in furthering the reduction of air pollutants for clean air applications. The Model 1000M methane oxidizer meets industry requirements for thermal oxidation with increased oven reliability and stability, faster rise times, and higher converter efficiencies. Average converter efficiency is 95% or greater. The proprietary two-stage, multiple path tube and oven design enable the Model 1000M the ability to oxidize reactive species at relatively low temperatures. Oven temperature is precisely maintained by a microprocessorbased temperature controller driving a high-capacity optically isolated triac control module. The dual display temperature controller uses pulse width modulation to regulate the heating cycle and minimize thermal noise from on/off cycling. A thermal cutoff switch works with the heating element to protect the electronic circuitry and oven from thermal overload conditions.

The Model 4010M is a simple, but powerful Intelligent Multi-gas Dilution Calibrator that can easily perform gas dilution, multi-source gas blending, ozone generation, and gas phase titration (GPT = NO + O3 => NO2) for environmental, laboratory, or point source monitoring.

Sabio’s Model 2505 Portable Permeation Oven generates precise gas concentrations for calibration of air quality analyzers, source monitors and other instruments. The Model 2505 may be combined with the Model 2010 and 4010 Gas Dilution Calibrators to form a very powerful intelligent calibration system. Carrier air is provided by an internal air supply featuring an inlet filter, quiet internal pump and rear mounted scrubber canister. A precision regulator and critical orifice is used to regulate carrier flow through the permeation oven. A 0-15 psig pressure gauge is calibrated to provide carrier flow reference points. The heart of the Model 2505 is a large capacity Teflon coated permeation chamber that can accommodate many types and sizes of permeation tubes concurrently. A front-panel-mounted knurled screw-in stopper is provided for easy access of the permeation chamber. The permeation chamber is housed in a precise temperature controlled insulated oven that features a carrier pre-heater, heaters and RTD sensor. The oven temperature is precisely maintained by a microprocessor based temperature controller driving an optically isolated DC control module. Pulse width modulation is used to regulate the heat cycle to minimize thermal noise due to heater on/off cycling. Dual displays on the temperature controller provide direct readout of set point temperature and actual oven temperature. Oven temperature is maintained within +/- 0.1 deg. C of setpoint. The oven temperature control system and carrier air supply are battery backed for 8 hours of operation.

The Model 2020 is a portable source for clean, dry air designed to meet a wide range of requirements for the environmental industry. From supplying air for calibration systems to purge air for permeation ovens, the small package size and weight make the Model 2020 the preferred choice for field and audit personnel as well as operating environments with limited bench space. The Model 2020 uses an internal permeation drying system for moisture removal and is coupled with filter canisters for scrubbing NO, NO2, O3, SO2, and H2S. Optional features such as the internal carbon monoxide (CO) oxidizer or external hydrocarbon (HC) oxidizer further the Model 2020’s clean air capabilities.

Users can easily perform precise gas dilution, ozone, and gas phase titration (GPT) calibrations with the Model 4010T Gas Dilution Calibrator. Enhanced with the latest technology, the Model 4010T was designed to set a new standard of quality and performance for a variety of applications in ambient air monitoring including trace levels, continuous emission monitoring (CEM), fugitive emissions, odor and process monitoring. The Model 4010T calibrator uses embedded microprocessor technology to accurately deliver and control gas concentrations, along with multiple curve fits to linearize the desired output for the intended purpose. The unit can be operated manually or automatically to conduct calibrations or audits that exceed U.S. Environmental Protection Agency (EPA) method requirements. Highly accurate mass flow controllers (MFC’s) along with an optional ultraviolet (UV) ozone generator and photometer ensure reliable, repeatable gas concentrations. The Model 4010T can store 20 calibration sequences, with up to 20 concentration levels in each sequence. Local or remote operation is accomplished using the front panel keypad, external keyboard, RS-232 or Ethernet ports. Intuitive, menu driven software allows uncomplicated programmability and access to real-time diagnostics.

The Model 2020-EXP is a portable source for clean, dry air designed to meet a wide range of requirements for the environmental industry including trace level applications. From supplying zero air for calibration systems to purge air for permeation ovens, the small package size and weight make the Model 2020-EXP the preferred choice for field and audit personnel as well as operating environments with limited bench space. The Model 2020-EXP uses an internal permeation drying system for moisture removal and is coupled with filter canisters for scrubbing NO, NO2, O3, SO2, and H2S. Optional features such as the internal carbon monoxide (CO) oxidizer or external hydrocarbon (HC) oxidizer further the Model 2020’s clean air capabilities.