Smart environmental monitoring solutions
Continuous trend monitor that gives plant operators to see the performance of the filtration systems and ducts over a period of time. Perfect for installation after any filtration system or in common line channels leading into the emissions points of a plant.
State of the art Inductive Electrification principle minimizes the need for maintenance on the dust monitor and provides an accurate trend for end users. 4-20mA output combined with an easy-to-use auto-setup feature that takes less than 30 minutes from installation makes the device both convenient and reliable.
Categories:
Have questions? Call +61 2 9622 6327
|
|
S303 | S304 |
|
Rugged IP66 rated Aluminum pressure casted enclosure |
x | x |
| Quick clamp process connection for easy installation | x | x |
|
Green, yellow and red LED for status indication |
x | x |
| Auto setup function for efficient commissioning | x | x |
|
Two dry contact relays to indicate dust alert and dust alarm |
x | x |
| The Instrument can be powered with 24 VDC or 100 to 240 VAC | x | x |
|
USB interface for convenient connection during commissioning |
x | x |
| Dust-Tool easy software for parametrization and setup | x | x |
|
Normalized during production to ensure identical instruments and quality |
x | x |
| Linearized during production to standard test dust (Arizona Road Dust) | x | x |
|
RS485 to communicate with Modbus RTU or Sintrol protocol |
x | x |
| Bright green illuminated 4-digit display and buttons for local setup and status | x | x |
|
Isolated and active mA-output, with NAMUR NE 43 compliant alarms |
x | x |
| Zero and span check with automatic drift compensation | x | |
|
Calibration possibility to read directly mg/m3 |
x | |
| Flow speed compensation by the mA-output of a third party measurement device | x | |
|
Wireless Network capability to avoid cabling cost and extensive installation |
o | o |
| Measurement Objects | Total Suspended Particles (TSP) |
| Measurement Range | Detection Limit 0,01 mg/m³ Maximum Range up to several g/m³, depending on conditions |
| Measurement Principle | Inductive Electrification |
| Protection Code | IP65 |
| Power supply | 24 VDC and 80-240 VAC |
| Power consumption | Up to 10 W |
| Output signals | • Two dry contact Relays, max 5A@30VDC / 5A@240VAC • Isolated 4-20 mA output loop |
| Communication interface | • Serial communication RS-485 • USB |
| Communication protocol | • Modbus RTU (RS-485) • Sintrol network (USB, RF and RS-485) |
Ambient Conditions |
|
| Temperature | -40°C to +60 °C (-40 °F to 140 °F) |
| Humidity | Max 95% RH (non-condensing) |
Materials and Weight |
|
| Enclosure / casing | Aluminum |
| Weight | 1.5 kg (3.3 lbs) |
Process conditions |
|
| Temperature | Max 200 °C (392 °F) default, optionally up to 700 °C (1292 °F) |
| Pressure | Max 300 kPa default, optionally up to 6000 kPa |
| Humidity | Max 95% RH (non-condensing) |
| Temperature | – Starting -20 to +40°C ı -4 to 104 °F – Running -20 to +60°C ı -4 to 140 °F |
| Humidity | Max 95 % RH (non-condensing) |
Wireless Communication(only for RF models) |
|
| Frequency band | 868 MHz or 915 MHz, 15 channels |
| Transmitting power | Up to +23 dBm, user-adjustable |
| Receiver sensitivity | -110 dBm |
| Communication protocol | Proprietary Sintrol Network protocol |
| Typical range | • 868 MHz Version • Up to 1000 m (3280 ft) in an urban environment • NOTE: The RF communication range is highly affected by the surrounding structures and other RF devices. |
Talk to our sales team. Call +61 2 9622 6327
ENVEA AUTOMATIC & REAL-TIME SUSPENDED PARTICULATE MONITOR
The MP101M particulate analyzer uses the standard ISO 10473 beta gauge measurement method for the continuous measurement of the concentration of fine dust in ambient air.
Particulates
